Item added to your cart
OneUp EDC Lite Plastics Kit - No Tool - Purple
OneUp EDC Lite Plastics Kit - No Tool - Purple
EXTRA 10% OFF THIS ITEM
Limited Time Only
Product ID: GM072524-57
Only 1 Items Left
Shop all OneUp | Shop all Multi Tools
View full detailsDescription
Easy to install. Easy to carry. And compatible with pretty much any bike with a steerer tube. The included 9 function Multi Tool contains your most used tools and lives inside your stem/steerer tube.
Product Specs
- Weight: 75g
- Colors: Black, Red, Blue, Green, Orange, Purple, Turquoise
- Functions: 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx , Flat Head Screwdriver
What's in the Box
- EDC Multi-tool.
- EDC Lite Carrier
- EDC Tool clip
- Starnut setter bolt
- Headset preload bolt
Easy Installation.
All you need is a hammer, a 4mm hex and five minutes to install EDC Lite on your bike.
The Tool You Need
EDC Lite puts the most common tools you need in your hand, when and where you need them. The 9 function multi-tool includes 2, 2.5, 3, 4, 5, 6, 8mm hex, T25 torx and a flat head screwdriver.
EDC LITE COMPATIBILITY
ENSURE YOUR FORK IS COMPATIBLE -VERY IMPORTANT
Incompatible forks: Giant Overdrive 2 Forks. RockShox 35 Series Forks. Cannondale Lefty Forks. Carbon Steerers
STEERER TUBE INNER DIAMETER
The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.
STEERER TUBE LENGTH
Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.
- Fox except Fox 38 = 190mm min
- Fox 38 = 210mm min
- RockShox Forks = 210mm min
Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.