When our racers travel to big mountains like the Chilean Andes for the Andes-Pacifico, they bring their Nomads. One look at the terrain tells you why – it’s rough, steep and more worthy of being a World Cup DH course than an enduro stage. Under these circumstances, the Nomad’s aggressive 65-degree head angle delivers V10 handling at Syndicate speeds. 165mm of VPP™ travel is delivered via a V10-style upper link and neatly recessed lower link design that's been extended to the Bronson and 5010.
The Nomad is uncompromising in its purpose, and as such has been designed specifically around one-by drivetrains only. One-by offers a wide range of options for just about any kind of riding, and the design permits some seriously compact chainstays. On the front end of the bike, the rangy cockpit and relatively steep seat tube angle make for a surprisingly efficient pedaling position for such a capable descender. Internal cable routing comes courtesy of thin carbon fiber tubes molded into the frame from entry to exit, ensuring completely integrated, hassle-free routing every time.
This CC-level carbon frame is every bit as stiff and strong as our C-level frame, but weighs about 280 grams less, due to the use of some lighter, stronger, and more expensive carbon fiber. Using this material in key places allowed us to use less material overall, which is what shaves off more than half a pound from the frame.
142mm rear axle spacing
165mm (6.5") VPP™ suspension
Angular contact bearings maximize stiffness
Collet axle pivots lock in place without pinch bolts
Double sealed pivots for long bearing life
Forged upper and lower links
Full carbon frame and swingarm
Internal carbon tubes ensure precise and hassle-free routing of derailleur and seat post cables
ISCG-05 tabs for chainguide compatibility
Molded rubber swingarm and downtube protection
Recessed lower link protected from rock strikes
Single grease port on lower link for swift and easy maintenance